Country: Deutschland Language: English | Deutsch
+49 6934879456

DTK Series: DTK1007 - DTK3650


Progressive Adjustment

The DAMPTAC DTK series is widely used in the automotive industry, the automation industry, etc., which allow the mobile load to decelerate smoothly until stopped, without bounce, and reliability is fully validated. Simply adjust the knob, you can change the size of the buffer damping force to adapt to different application conditions, to provide you with the best buffer effect. DTK series selection is convenient, flexible application, a single model can be adjusted to meet the needs of many different working conditions. The DTK series is available in sizes, from M10 to M36, from 7 mm to 50 mm, with a single impact absorbing energy from 5.5 Nm to 692 Nm, and the accessories are also available to solve all customer application requirements. The same specification and stroke adjustable damper, DTK series of absorbing energy and effective weight is much higher than other brands, while the service life of up to 500 million impact cycle (correct selection and use); Moreover, DTK series comes with "side To the force protection "function, in the same application conditions (with lateral force, not installed adapter), DTK series of life far more than other brands of the same series of products! Based on the above advantages, DTK series of buffers greatly improve the efficiency of machinery and equipment, saving more energy consumption, cost-effective to ensure the stable operation of the entire production line.
• The DTK is an adjustable model, the adjustment knob can be rotated 360 °, the scale from 0 to 12, the buffer damping force from soft to hard, linear change, by adjusting, can achieve the best buffer effect.
• The vast majority of brands on the market with adjustable models or behind the single-hole adjustment design, DTK uses Germany's most advanced porous precision fine-tuning technology, in the entire buffer stroke to provide the minimum peak constant damping force to achieve fast and flexible Buffer, shorten the buffer time, reduce the impact noise, reduce equipment maintenance costs, effectively protect the production equipment, greatly improving the production efficiency.
• DTK uses the German advanced composite polyester oil seal and dust ring, with high-strength hard chrome plated piston rod and special materials of foam storage accumulator, greatly improving the service life (up to 5 million times) and resistance Harsh environmental performance.
• DTK uses a unique pre-extended bearing and the German advanced oil-free bearings, a significant increase in the product of the impact resistance of the side, so DTK comes with "lateral force protection" function.
• Impact speed: 0.01 ~ 5 m / s (special custom models up to 20m / s)
• Ambient temperature: -10 ℃ ~ + 80 ℃ (special custom model -40 ℃ ~ +120 ℃)


Energy capacity 5.5 Nm/Cycle to 692 Nm/Cycle

Stroke 7 mm  to 50 mm

Impact velocity range 0.1 m/sec to to 5.1 m/sec

Operating temperature range 0°C to 80 °C

Mounting In any position

Positive stop Integrated

Material Outer body, Accessories: Steel corrosion-resistant coating; Piston rod: Hardened stainless steel;

Damping medium Oil, temperature stable

Application field Miniature slides, Pneumatic cylinders, Handling modules, Copiers


Confirm the adjustment knob to 0, set the buffer correctly in the station to start the impact, through the impact of sound and careful observation to determine the buffer effect. If there is no significant deceleration during the entire buffer stroke and there is a loud noise in the buffer stroke terminal, the damping force is too small. Please adjust the scale of the buffer to 1 speed and do the test. If there is no improvement, Continue to adjust to 2 files, 3 files ... .... If the adjustment to the X file, the movement of the load can be quickly and smoothly stopped, the whole process only "pop" sound, this time has reached the desired buffer effect, with the product packaging L-shaped wrench lock the lock screw, Keep this scale. On the contrary, if the front end of the buffer stroke or the middle of the sudden slow down and issued a "bang" a loud noise, then the damping force is too large, should reduce the scale re-test. If repeated adjustment and testing can not achieve the desired buffer effect, then the buffer selection problems, it may need to replace the larger models to test, and suggested to re-confirm the selection..
  • Miniature slides
  • Pneumatic cylinders
  • Handling modules
  • Copiers
  • Measuring tables
  • Machines and plants
  • Locking systems