Country: Deutschland Language: English | Deutsch
+49 6934879456

DTS Series: DTS0604 - DTS3650

BACK

Self-Compensating

The DAMPTAC DTS self-compensation series is widely used in non-standard automation industry, they make the mobile load steady deceleration until the stop, no rebound, reliability is fully verified. DTS design compact and simple structure, mainly used in the parameters of the change in the size of the workplace. Compared to the adjustable DTK series, DTS selection requires more accurate application parameters, fuzzy parameters may lead to the wrong selection, and ultimately cause the use of the buffer problem. However, if after accurate selection or field test verification, DTS has a greater advantage in the installation process without adjustment, direct installation, you can quickly install large quantities, to avoid the risk of on-site workers to adjust the error. DTS series models are rich in specifications, thread from M6 to M36, travel from 4mm to 50mm (special models to 80mm), a single impact absorption energy from 2Nm to 560Nm, and accessories are also rich and complete, can solve all customer application requirements. The same size and stroke of the self-compensating buffer, DTS series of absorbing energy and effective weight is much higher than other brands, while the service life of up to 500 million impact cycle (correct selection and use); Moreover, DTS series comes with "side To the force protection "function, in the same application conditions (with lateral force, not installed adapter), DTS series of life far more than other brands of the same series of products! DTS to provide special custom services, customers can special conditions for the provision of professional perfect solution!

• DTS uses the German advanced integrated energy damping tube design, effective damping area greatly increased, absorbing energy is much higher than the market most of the same brand of the same product specifications.
• DTS uses a state-of-the-art composite polyester seal and dust seal, with a high-strength hardened chrome piston rod and a special material of foam storage accumulator, greatly improving the service life (up to 5 million times) and resistance Harsh environmental performance.
• DTS uses a unique front-end bearings and advanced German oil-free bearings, a significant increase in the product of the impact resistance of the side, so DTS comes with "lateral force protection" function. In the same application conditions (with lateral force, not installed adapter), DTS series of life far more than other brands of the same series of products!
• Impact speed: 0.01 ~ 5m / s (special custom models up to 20m / s)
• Ambient temperature: -10 ℃ ~ + 80 ℃ (special custom model -40 ℃ ~ +120 ℃)
• Customized service: Professional customization service for special working conditions, consult DAMPTAC.

TECHNICAL DATA

Energy capacity 5 Nm/Cycle to 490 Nm/Cycle

Stroke 4 mm  to 50 mm

Impact velocity range 0.1 m/sec to to 5.1 m/sec

Operating temperature range 0°C to 80 °C

Mounting In any position

Positive stop Integrated

Material Outer body, Accessories: Steel corrosion-resistant coating; Piston rod: Hardened stainless steel;

Damping medium Oil, temperature stable

Application field Miniature slides, Pneumatic cylinders, Handling modules, Copiers

NOTE

DAMPTAC can provide you with standard multi-orifice and multi-level orifice design and other special custom services, so we can for many special work conditions to provide professional solutions, which other brands can not provide services. Standard multi-orifice design: Most of the operating conditions can be designed using a standard multi-orifice design, the damping force remains constant throughout the buffer stroke and the peak is small. This kind of constant damping force way provides good protection for the machine equipment. The composite multi-level orifice design: In some special cases, we need special composite multi-stage orifice design, which can provide the deceleration And damping. For example: one is in the initial stage of the buffer stroke damping force is very large, so that the rapid decline in the speed of moving objects, and then change the damping force to a lower level, to maintain the object continued to slow down until the stop. The other is the initial stage of the damping force is small, moving objects and load to achieve "soft contact" at the end of the damping force suddenly become large objects immediately stop quickly..
  • Miniature slides
  • Pneumatic cylinders
  • Handling modules
  • Copiers
  • Measuring tables
  • Machines and plants
  • Locking systems

BACK